|
|
|
Forum Newbie
      
Group: Forum Members
Last Login: 7/28/2008 11:01:17 AM
Posts: 1,
Visits: 4
|
|
Help Please, I have a 1929 model A Ford pick-up and would like to convert it from the slow turning 6 to a little quicker 8 volt. Many years ago my dad did all of his tractor this way. Much better cranking. I also know it plays havoc with the bulbs. It's not driven a night so I'm not worried about the head lights. Just the break and tail. I'll just to have a good supply of bulbs. LOL But is there anything else that I need to be concerned with. I've read articles that say the starter is fine with the 8 volt but that about all I've been able to come up with. Will the generator put any power into the battery ? I've been told I can use a 1.5 amp trickle charger set on 6 volt and it will keep the battery up, is this true. You'd be surprize at how many of the younger people have never heard of the 8 volt. The first auto store I went to the kid looked at me like I was crazy, you want a "WHAT" ? LOL Thanks for the help, LiLRdWgn (Gene)
|
|
|
|
|
Forum Newbie
      
Group: Forum Members
Last Login: 10/29/2008 8:05:57 PM
Posts: 1,
Visits: 4
|
|
| Hello, good luck with your project! 8 volt bats are getting harder and harder to come by, and are quite expensive. If I were you I would install a 12 volt Bat, convert to a ( 1977ish ) GM alt. simply replace all the bulbs you plan on using, with 12V bulbs. AS for the starter, If it is in good condition, and the engine starts easily( can't crank and crank ) the starter will hold up just fine for a long time. AS for the points and coil, you can use as is for a while. The coil should be replaced with a 12v unit, as well as the condenser.Point are points, just use good ones. In doing this transformation, it will be very cost effective, and be very reliable. JUST remember 12v system is Neg ground. good luck Teek
|
|
|
|